HP StorageWorks XP Remote Web Console Software - Manual (Page 3)

Snapshot XP user guide 3
About this guide
This guide provides information about the following:
• Understanding Snapshot XP
• Installing Snapshot XP
• Using Snapshot XP
• Troubleshooting Snapshot XP
Intended audience
This guide is intended for customers and HP-authorized service providers with knowledge of the following:
• Disk array hardware and software
• Data processing and RAID storage subsystems and their basic functions
NOTE: The functions described in this manual may be limited, depending on your assigned level of user
access. Some users will have read-only access while others will have limited or full array access. For
additional information on users and user groups, please see the HP StorageWorks XP Remote Web
Console User Guide.
Prerequisites
Prerequisites for using this product include:
• Installation of the HP StorageWorks disk array(s)
• Installation of the license key for this product
Firmware versions
The recommended firmware versions shown in Table 1 provide the optimal level of support for the features
provided with this product. Older firmware versions can be used; however, product features enabled with
newer firmware will not appear.
Related documentation
In addition to this guide, please refer to other documents for this product:
• HP StorageWorks XP Remote Web Console User Guide for XP12000/XP10000
• HP StorageWorks XP Remote Web Console User Guide for XP1024/XP128
• HP StorageWorks Business Copy XP User Guide for the XP10000/XP12000
• HP StorageWorks External Storage XP User Guide
• HP StorageWorks LUN Configuration and Security Manager XP User Guide for the
XP10000/XP12000
• HP StorageWorks LUN Security XP Extension User Guide
You can find these documents at http://www.hp.com/support/rwc/manuals
• HP StorageWorks RAID Manager XP User Guide
Table 1 Recommended and minimum firmware versions
XP disk array Minimum Recommended
XP12000 50-04-31/00 50-05-06/00 or later
XP10000 First released version 50-05-06/00 or later