HP StorageWorks XP Remote Web Console Software - Manual (Page 44)

44 Snapshot XP
• Set button
Adds V-VOLs to the V-VOL information setting list.
• Delete button
Deletes selected V-VOLs from the V-VOL information setting list.
• V-VOL information setting list (middle of pane)
Information about the V-VOL(s) you are creating.
• No.: Number
• Emulation: V-VOL’s emulation type
• Capacity: V-VOL’s capacity
• Back button
Returns to the New V-VOL Group pane while maintaining settings in this pane.
• Next button
Confirms the setting in this pane, and displays the Create V-VOL wizard pane (2).
• Cancel button
Cancels the setting in the Create V-VOL wizard pane (1), and closes the pane.
Figure 15 Create V-VOL wizard pane (2)
The Create V-VOL wizard pane (2) displays the following items:
• V-VOL Group
V-VOL group ID.
• V-VOL information setting list (upper-right area of pane)
Information about the V-VOLs you are creating.
• No.: Number
• Emulation: V-VOL’s emulation type
• Capacity: V-VOL’s capacity
• CU:LDEV: V-VOL’s CU and LDEV numbers
• Select LDEV No.
Settings of LDEV numbers for the CU number selected in Select CU No. Numbers in the upper end and
left side indicate the LDEV number. For example, the LDEV number of the cell whose upper end is +2
and the left side is +10 is 12.