HP 3PAR Operating System Software - Manual (Page 161)

3PAR InForm Management Console 4.1.0 User’s Guide
320-200231 Rev A 161
Step 1. General
1. In the General group box:
a. System list - Select the system on which the port will be configured.
b. Port list - Select the port to be configured as an RCIP port.
2. In the IP Settings group box, perform the following:
a. Select Obtain an IP Address automatically.
b. MTU list - Enter the MTU value.
or
a. Select Use the following IP address.
b. IP Address - Enter the iSCSI port's IP address.
c. Subnet Mask - Enter the iSCSI port's subnet mask.
d. Gateway - Enter the iSCSI port's gateway address.
e. MTU list -Enter the MTU value.
3. Click Finish to complete the iSCSI port configuration, or click Next to enter iSNS
settings.
Step 2. iSNS Settings
1. Primary IP Address - Enter the Internet Storage Name Service (iSNS) IP address.
2. Secondary IP Address - Enter the iSNS secondary IP address.
3. TCP Port - Enter the iSNS TCP port. The default port is 3205.
4. Click Finish to complete the iSCSI port configuration, or click Next to view the
configuration summary.
Step 3. Summary
Review the summary information. When satisfied, click Finish.
See also:
Manager Pane
Management Tree
Common Actions Panel
Viewing Ports