HP 3PAR Operating System Software - Manual (Page 89)

3PAR InForm Management Console 4.1.0 User’s Guide
320-200231 Rev A 89
The Ports tab provides the following information:
Group Column Description
Cards
Type
The type of interface card, either Ethernet or Fibre Channel
(FC).
Position The position of the card in node:slot format.
Ports The number of ports on the interface.
Max Rate The maximum rate in Gbps.
Ports
Type
The port type, Fibre Channel (FC), iSCSI, Remote Copy over
IP (RCIP), or Remote Copy over Fibre Channel (RCFC).
Connected
Device Type
The connected device type, Free, Disk, Host, or InServ.
Speed The speed of the port in Gbps.
Count The number of ports.
See also:
Viewing the Controller Nodes Summary Screen
Working with Ports
Viewing Controller Node Power Supplies
Details
To view the Controller Node Power Supplies details screen:
1. Access the Controller Nodes screen.
2. In the upper pane, click the Summary tab.
3. Select a node.
4. In the lower pane, click the Power Supplies tab.