HP ProLiant SL390s G7 Server - Manual (Page 7)

Component identification 7
*By default, the HP NC543i 2-port 4x QDR IB/10Gb Adapter is configured as a dual-port 10 GigE device. If the
InfiniBand Enablement kit is installed, then the onboard QSFP port functions as InfiniBand, and the device operates as a
1-port 10 GigE (SFP+) and 1-port QDR InfiniBand (QSFP).
Front panel LEDs and buttons
Item Description Status
1 Power On/Standby button
and system power LED
Green—System on
Amber—System shut down, but power still applied.
Off—Power cord is not attached, or power supply has failed.
2 SFP+/10 GigE activity LED Flashing green—Activity exists
Off—No activity exists, or no connection exists.
3 SFP+/10 GigE link LED Green—Linking
Off—No connection exists.
4 Health LED Green—Normal
Flashing amber—System degraded
Flashing red—System critical
5 QSFP/InfiniBand activity LED Amber—Logical link established
Flashing amber—Activity exists.
Off—No activity exists, or no connection exists.
6 QSFP/InfiniBand port link
LED Green—Physical link negotiated.
Off—No connection exists.
7 NIC 2 speed LED Green—LAN connection using a GbE link
Amber—LAN connection using a 10 Mbps/100 Mbps link
Off—No LAN connection exists.
8 NIC 2 activity LED Flashing green—Network data activity exists.
Off—No network data activity exists, or no network connection
exists.
9 NIC 1/iLO 3 activity LED Flashing green—Network data activity exists.
Off—No network data activity exists, or no network connection
exists.
10
NIC 1/iLO 3 speed LED Green—LAN connection using a GbE link
Amber—LAN connection using a 10 Mbps/100 Mbps link