Replacing the hard disk drive – HP TouchSmart IQ775 Desktop PC User Manual
Page 56
Advertising
52
HP TouchSmart PC User Guide
Replacing the hard disk drive
1
Complete the procedures to remove the hard disk drive, if necessary. See “Removing the hard disk
drive” on page 51.
2
Place the hard disk drive into the cage and insert the four screws.
3
Connect the power and data cables to the hard disk drive.
4
Place the hard disk drive cage over the two bottom screws and into the chassis.
5
Insert the two top screws and tighten the two bottom screws.
6
Complete the procedures to replace the vertical cover and close the HP TouchSmart PC. See “Opening
and Closing the HP TouchSmart PC” on page 45.
Screws
Power
cable
Data
cable
Screw (tighten)
Screw (tighten)
Screw (insert)
Screw (insert)
Advertising