Tcp/ip connection – HP Designjet T2500 eMultifunction Printer series User Manual
Page 29
7.
The printer software is installed, including the printer drivers and other HP software, such as the HP
Utility. An active Internet connection is recommended in order to perform a full installation with the
latest software.
If you have enabled Web Services on your printer, you can print to your printer by email. You can find
the email address in the printer's front panel: press
, then
. Then send the file you want to
print to that email address as an attachment.
8.
When the software has been installed, the HP Printer Setup Assistant starts automatically, to set up a
connection to your printer. Follow the instructions on your screen.
9.
When you reach the Select Printer screen, look for your printer's mDNS service name (which you noted
in step 1) in the Printer Name column.
●
If you find the right name, scroll sideways if necessary to see the Connection Type column, and
check that it shows Bonjour. Then highlight that line. Otherwise, continue searching further down
the list.
●
If you cannot find your printer's name with a Bonjour connection type, check the box My printer is
not in the list.
Click Continue.
10.
Continue following the instructions on the screen. When you reach the Printer Queue Created screen,
click Quit to exit, or Create New Queue if you want to connect another printer to the network.
11.
When the HP Printer Setup Assistant has finished, you can remove the DVD from the DVD drive.
If the printer driver is already installed, the HP Printer Setup Assistant can be run at any time from the DVD.
TCP/IP connection
1.
Go to the front panel and make a note of the printer's URL (see
Access the Embedded Web Server
).
2.
Insert the HP Start-up Kit DVD into your DVD drive.
3.
Open the DVD icon on your desktop.
4.
Open the Mac OS X HP Designjet Installer.
5.
Follow the instructions on your screen.
6.
The printer software is installed, including the printer drivers and other HP software, such as the HP
Utility. An active Internet connection is recommended in order to perform a full installation with the
latest software.
If you have enabled Web Services on your printer, you can print to your printer by email. You can find
the email address in the printer's front panel: press
, then
. Then send the file you want to
print to that email address as an attachment.
7.
When the software has been installed, the HP Printer Setup Assistant starts automatically, to set up a
connection to your printer. Follow the instructions on your screen.
8.
When you reach the Select Printer screen, look for your printer's URL (which you noted in step 1) in the
Printer Name column.
ENWW
Connect a computer to the printer by network (Mac OS X)
19