HP Designjet T2500 eMultifunction Printer series - Manual (Page 99)

● Copy color allows you to choose color or grayscale printing.
● Roll allows you to specify printing on roll 1 or roll 2, or you can choose Save paper, which
automatically chooses the narrowest roll on which the print will fit.
● Job output allows you to send the print to stacker or basket.
● Content type allows you to optimize the scan for a line drawing, a photographic image, or a mixed
image.
● Original type allows you to specify the paper type on which the original image has been printed.
To optimize scan quality, ensure that this setting is correct.
NOTE: If you change the settings in this way, the changed settings apply to the current job but are not
saved permanently. You can change the default settings from the main menu: press , then ,
then Copy preferences.
5. When you are satisfied with the copy settings, press anywhere on the screen to return to the previous
page, then press Start.
6. If two rolls are loaded, you can choose to print on either roll, or you can let the printer choose
automatically.
NOTE: The printer will automatically rotate the image by 90° if it can save paper by doing so.
7. When the scan is complete, press to eject the scanned sheet from the scanner; be ready to pick it
up.
8. While the scanned image is being printed, you can perform some other operation: you don't need to wait
for the end of the print.
9. After printing, you can choose to make another copy or go to the job queue. If you make another copy
immediately without returning to the home screen, the temporary settings used for the previous copy
are used again.
NOTE: By default, if the original is skewed in the scanner (not loaded straight), the scanner will try to
correct the skew automatically. To turn off this automatic correction, press , then , then Scan
preferences > De-skew > Off.
ENWW 89