Using autocad – HP Designjet T620 Printer series User Manual
Page 70
Advertising
Using AutoCAD
1.
The AutoCAD window shows the Model tab followed by a tab for each layout. Normally one of the
layouts is printed rather than the model.
2.
Select File > Plot.
3.
You can see further options by pressing the circular button in the lower right corner of the window.
NOTE:
The Quality option here does not refer to the final print quality but to the quality of AutoCAD
viewport objects that are sent for printing.
ENWW
Print a project
67
Pr
in
ting e
x
amples
Advertising