HP StorageWorks 2.32 Edge Switch - Manual (Page 186)

Information and error messages 186
Invalid firmware file. The file selected for firmware
download is not a firmware version
file. Select the correct firmware version file and
retry the operation.
Invalid management server
address. The IP address specified for the HAFM
appliance is unknown to the domain
name server (invalid). Verify and enter a valid HAFM appliance
IP address.
Invalid network address. The IP address specified for the
product is unknown to the domain
name server (invalid). Verify and enter a valid product IP
address.
Invalid port address. Invalid port address has been
entered. Verify port address through the Configure
Addresses–“Active” dialog box (FICON
management style only) and re-enter.
Invalid port number. The port number must be within a
range of ports for the specific director
or switch model. Enter a port number within the correct
range.
Invalid port swap. Port swap selection is not allowed. Ensure that each port selected for swap
has not been previously swapped.
Invalid response received from
switch. An error occurred at the switch
during a firmware download
operation. Retry the firmware download operation. If
the problem persists, contact the next level
of support.
Invalid response received from
director. An error occurred at the director
during a firmware download
operation. Retry the firmware download operation. If
the problem persists, contact the next level
of support.
Invalid serial number for this
feature key. The serial number and the feature key
did not match. Ensure that the feature key being installed
is specifically for this director serial
number.
Invalid UDP port number. The specified user datagram protocol
(UDP) port number is invalid. The
number must be an integer from 1
through 65535 inclusive. Verify and enter a valid UDP port number
from 1 through 655535.
Invalid value for BB_Credit. At the Configure Fabric Parameters
dialog box, the buffer-to-buffer credit
(BB_Credit) value must be an integer
from 1 through 60 inclusive. Verify and enter a valid number between
1 through 60.
Table 8 Element Manager messages (continued)
Message Description Action