HP LaserJet M3027 Multifunction Printer series - Manual (Page 132)

Analog faxing
On the HP LaserJet M3027x or the HP LaserJet M3035xs MFPs, the device can function as a standalone
fax machine.
Connect the fax to a telephone line
When connecting the fax to a telephone line, ensure that the telephone line that is being used for the
fax is a dedicated line that is not used by other devices. In addition, this line should be an analog line
because the fax will not function correctly if it is connected to some digital PBX systems. If you are not
sure whether you have an analog or digital phone line, contact your telecom provider.
NOTE: HP recommends using the telephone cord that comes with the device to ensure that the fax
functions correctly.
1. Remove the fax jack cover from the device, and then connect one end of the telephone cord to the
fax jack. Push the connector until it clicks, and then replace the fax jack cover.
2. Connect the other end of the cord to the telephone jack on the wall. Push the connector until it
clicks or until it is securely seated. Because different types of connectors are used in different
countries/regions, the connector might not make an audible click.
Configure and use the fax features
Before you can use the fax features, you must configure them in the control-panel menus. For example,
you need to specify the following information:
● Date and time
● Location
● Fax header
For complete information about configuring and using the fax accessory, and for information about
troubleshooting fax-accessory problems, see the HP LaserJet Analog Fax Accessory 300 User Guide,
which is provided with the fax accessory.
120 Chapter 9 Fax ENWW