HP LaserJet M3027 Multifunction Printer series - Manual (Page 142)

Embedded Web server sections
Tab or section Options
Information tab
Provides device, status, and
configuration information
● Device Status: Shows the device status. To change the default settings, click
Change Settings.
● Configuration Page: Shows the information found on the configuration page.
● Supplies Status: Shows supplies ordering and recycling information. To order new
supplies, click Shop for Supplies in the Other Links area on the left side of the
window.
● Event log: Shows a list of all device events and errors.
● Usage page: Shows a summary of the number of pages the device has scanned,
grouped by size and type.
● Device Information: Shows the device network name, address, and model
information. To change these entries, click Device Information on the Settings tab.
● Control Panel: Shows messages from the device control panel, such as Ready or
Sleep mode on.
Settings tab
Provides the ability to configure the
device from your computer
● Configure Device: Allows you to configure device settings. This page contains the
traditional menus found on devices using a control-panel display.
● E-mail Server: Used in conjunction with the Alerts page to set up incoming and
outgoing e-mail, as well as to set e-mail alerts.
● Alerts: Allows you to set up to receive e-mail alerts for various device and supplies
events.
● AutoSend: Allows you to configure the device to send automated e-mails regarding
device configuration and supplies to specific e-mail addresses.
● Security: Allows you to set a password that must be entered to gain access to the
Settings and Networking tabs. Enable and disable certain features of the
embedded Web server.
● Authentication Manager: Allows you to set the device functions that require users
to successfully log in before use.
● LDAP Authentication: Allows you to configure the digital sender to authenticate
against an LDAP server.
● Kerberos Authentication: Allows you to configure the digital sender to authenticate
against a Kerberos Domain Controller.
● Edit Other Links: Allows you to add or customize a link to another Web site. This
link is displayed in the Other Links area on all embedded Web server pages.
● Device Information: Allows you to name the device and assign an asset number to
it. Enter the name and e-mail address for the primary contact who will receive
information about the device.
● Language: Allows you to determine the language in which to display the embedded
Web server information.
● Date & Time: Allows time synchronization with a network time server.
● Wake Time: Allows you to set or edit a wake time for the device.
NOTE: The Settings tab can be password-protected. If this device is on a network,
always consult with the system administrator before changing settings on this tab.
130 Chapter 10 Manage and maintain the device ENWW