HP LaserJet M3027 Multifunction Printer series - Manual (Page 194)

Gray background
1. Do not use media that has already been run through the device.
2. Try using a different type of media.
3. Print a few more pages to see if the problem corrects itself.
4. Turn over the stack in the tray. Also, try rotating the stack 180°.
5. Open the Administration menu at the device control panel. On the Print Quality menu, increase the
Toner Density setting. See Print Quality menu on page 43 .
6. Make sure that the environmental specifications for the device are being met. See Operating
environment on page 221 .
7. Replace the print cartridge.
Toner smear
1. Print a few more pages to see if the problem corrects itself.
2. Try using a different type of media.
3. Make sure that the environmental specifications for the device are being met. See Operating
environment on page 221 .
4. Clean the inside of the device and run a cleaning page. See Clean the device on page 140 .
5. Replace the print cartridge.
Also see Loose toner on page 183 .
182 Chapter 11 Problem solving ENWW