HP LaserJet M3027 Multifunction Printer series - Manual (Page 82)

4. Place the paper in the tray and make sure that it is flat at all four corners. Keep the paper below
the height tabs on the paper-length guide in the rear of the tray.
5. Push down on the paper to lock the metal paper-lift plate in place.
6. Slide the tray into the device.
Load special media
The following table provides guidelines for loading special media and configuring the printer driver. Use
the correct media-type setting in the printer driver to obtain the best print quality. For some types of
media, the product reduces the print speed.
NOTE: In the Windows printer driver, adjust the media type on the Paper tab in the Type is drop-down
list.
In the Macintosh printer driver, adjust the media type on the Printer features pop-up menu in the Media
type drop-down list.
Media type Maximum amount
that can be loaded
into tray 2 or optional
tray 3 Printer-driver setting Tray 1 media
orientation Tray 2 or tray 3 media
orientation
Normal Up to 500 sheets Plain or unspecified Side to be printed
facing up Side to be printed
facing down
Envelopes Zero. Envelopes
should be used only in
tray 1 Envelope Side to be printed
facing up, stamp area
closest to the product,
short edge toward the
product Do not print envelopes
from tray 2 or optional
tray 3.
Heavy envelopes Zero. Envelopes
should be used only in
tray 1 Envelope Side to be printed
facing up, stamp area
closest to the product, Do not print heavy
envelopes from tray 2
or optional tray 3.
70 Chapter 4 Media and trays ENWW