HP LaserJet M3027 Multifunction Printer series - Manual (Page 85)

Select output bins
The product has two output bins into which it places finished print jobs:
● Top (face-down) output bin: This it the default output bin at the top of the product. Print jobs exit
the product face-down into this bin.
● Rear (face-up) output bin: Print jobs exit the product face-up into this bin at the rear of the product.
NOTE: You cannot use automatic duplex printing when printing to the rear output bin.
Print to the top output bin
1. Make sure that the rear output bin is closed. If the rear output bin is open, the device will deliver
the print job to that bin.
2. If you are printing on long media, open the top output bin support.
3. From your computer, send the print job to the device.
ENWW Select output bins 73