AMX MAX-CSE - Manual (Page 26)

MAX-CSE Web Interface
20 MAX-CSE/MAX-CSD10 Operation/Reference Guide
There is no limit to the number of concurrent logins allowed on the target MAX unit. By default, the
MAX unit is shipped with the following account and access rights:
Although the Administrator account can be modified numerous times to alter the username
and password required for access, only one login profile can exist on the MAX unit at any
given time. The privileges for that single account will always be that of an Administrator.
All login profiles (with associated Username and Password) are each required to have a
minimum of four characters and a maximum of 27 characters.
Communicating with the unit via the browser-based UI
1. Launch your web browser.
2. Enter the IP Address of the target unit (as seen on the unit’s LCD display) into the web browser’s
Address field (FIG. 12).
3. Press the Enter key on your keyboard to initiate communication with the MAX unit and launch the
initial on-screen security dialog (FIG. 12).
The MAX unit is shipped in a secured configuration which requires the user to enter a
username and password into the on-screen security dialog before gaining access to the UI
pages.
4. Enter the words administrator and password into the corresponding User Name/Password fields.
This is the factory default security login information. This information can later be changed.
5. Click OK to enter the information and proceed to the first UI page.
FIG. 12 Enter Network Password security dialog
Default Security Configuration (case-sensitive)
Administrator account:
Username: Admin
Password: 1988
Rights: All
Save login profile
selection box
Characters such as # (pound) & (ampersand) and ’ " (single and double quotes) are
invalid and should not be used in usernames, group names, or passwords.