Verification log, Verification log -7 – HP Storage Mirroring Software User Manual
Page 119
9
-
7
Verification log
A verification log is created during the verification process. The log details what is verified as well as which files are not
synchronized. Use the following steps to set up your verification log in the Management Console.
1.
Right-click a source machine on the left pane of the Management Console and select
Properties
.
2.
Select the
Logging
tab.
3.
At the top of the window,
Folder
identifies the location where the log files identified on this tab are stored.
4.
Under the Verification section,
Filename
contains the log file for the verification process. Update this field, if necessary.
The default is
DTVerify.log
.
5.
Specify the
Maximum Length
of the log file. The default is
1048576
bytes (
1
MB).
6.
By default, the log is appended each time a verification process is completed. Clear the
Append
check box if you do not
want to append to the previous log file.
NOTE:
All changes to a verification log should be made on the source side of a connection.
NOTE:
Changes made to the verification log in the
Server Properties,
Logging
tab will apply to all connections
from the current source machine.