HP Storage Mirroring Software User Manual
Page 322
C
-
14
f.
Specify the Network Name Parameters by entering the virtual name of the server. This is the name that clients will
look for on the network and the name that will register with DNS. It must be unique both on the cluster and on the
network.
g.
Click
Finish
to complete the creation of the Network Name resource.
4.
Create a Physical Disk resource for the new group.
a.
Right-click the group and select
New
,
Resource
.
b.
Specify the following fields on the New Resource dialog box:
!
Name
—Specify a name that identifies the disk drive associated with the virtual server. This name must be
unique within the cluster.
!
Description
—You can optionally add a more detailed description for this resource.
!
Resource type
—Specify
Physical Disk
.
!
Group
—The resource group name should be selected. If it is not, select the correct group name.
c.
Click
Next
to continue.
d.
Verify that both nodes appear as
Possible Owners
and click
Next
to continue.
e.
No other resources are required as dependencies for disk resources. Click
Next
to continue.
f.
Specify the disk drive associated with the physical disk resource.
g.
Click
Finish
to complete the creation of the Physical Disk resource.
The application group now contains all of the resources necessary to identify a virtual server. All resources should be offline
at this time. If any are online, they need to be taken offline by right-clicking the resource and selecting
Take Offline
.