HP ProLiant DL980 G7 Server - Manual (Page 56)

2. To make your modifications take effect, click SET. The CPU page then displays a message
indicating that the corresponding CPU settings will be changed, and then displays a
confirmation message indicating that settings were applied successfully (or not). For each CPU
setting changed successfully, the symbol appears alongside the New Value box of each
affected CPU. If a CPU setting fails, the symbol appears alongside affected CPUs. If you
have manually affinitized several (but not all) CPUs, HP ESO displays the Current column’s
Auto check box as cleared (no check mark).
To disable manual affinity:
1.
For a specific CPU, clear the New Value box to the right of the CPU. Then go to Step 2.
For all CPUs under a specific NUMA, clear the New Value box to the right of the NUMA id.
Then go to Step 2.
For all CPUs under an instance, check the New Value column’s master Auto check box at the
top of the instance CPU section (under the SET button). Then go to Step 2.
2. To enable modifications to take effect, click SET.
56 Using HP ESO