HP XP Performance Advisor Software - Manual (Page 165)

array. Provide the 5 digit serial number of the XP or the
P9000 disk array in the adjacent box. The data available
for the specified XP or the P9000 disk array is backed up
into the following .dmp files:
•
PA<XP or P9000_Disk_Array>_Exp.dmp
•
xpslperfData1<XP or P9000_Disk_Array>.dmp
up to xpslperfData8<XP or
P9000_disk_array>.dmp
Where, <XP or P9000_Disk_Array> refers to the XP or the
P9000 disk array for which the data is exported.
Select this option to migrate the configuration and
performance data from the HP XP P9000 Performance Time
Advisor database for a duration that you want. Enter the
duration (format
DD-MM-YYYY) in the Start Date and End
Date boxes. The data available for all the XP and the
P9000 disk arrays during the specified duration is backed
up into the following .dmp files:
•
PA<XP or P9000_Disk_Array>_Exp.dmp up to
PA<XP or P9000_Disk_Array>_Exp5.dmp
•
xpslperf_Data1<XP or
P9000_Disk_Array>.dmp up to
xpslperf_Data5<XP or
P9000_Disk_Array>.dmp
xpslperfConfigData6.dmp , which contains the
configuration data
The .dmp files are generated only for those components
that are configured on the XP or the P9000 disk arrays.
The corresponding log files provide the list of components
for which the data is imported into the .dmp files.
Select this option to migrate the configuration and
performance data from the HP XP P9000 Performance
Advisor database into the following .dmp files: All
•
PA<XP or P9000_Disk_Array>_Exp.dmp
•
xpslperf_Data<XP or P9000_Disk_Array>.dmp
Space requirements
•
Before taking a backup of the database, make a note of the Current Database Size under the
DB Configuration/Purge tab.
•
While restoring the database, ensure that the total available space on the disk where the
database is already installed is more than the backed up database. If the database is installed
on C:\HPSS\padb, the total available free disk space on C: must be greater than the size
of the database that be restored.
•
Before restoring the database, increase the Configured Maximum Database Size of the target
database by a value equal to the sum of the current target database size + size
of the database that is to be restored
. If the current database size is 5 GB and
the size of the database to be restored is 12.452 GB, change the Configured Maximum
Database Size under the DB Configuration/Purge tab to a size greater than 5 GB + 12.452
GB, which is 17.452 GB. So, increase the database size to 18 GB.
It is to avoid the automatic purging of data from the target management station database. For
more information on auto purge, see
“Automatically purging data” (page 146) .
Migrating data to another management station 165