HP XP Performance Advisor Software - Manual (Page 334)

IMPORTANT: The MP Blade Util - Top 20 Consumers and the MP Blade Util/Processing type
metrics are applicable only for the P9000 disk arrays.
The additional set of metrics that HP XP P9000 Performance Advisor supports for the RAID groups,
Ports, and the CLPRs are as follows:
Table 29 Additional metrics for RAID groups, ports, and CLPRs
Description Additional Frontend, Cache, and
Backend metrics Resources
The total backend tracks loaded in
random mode for a specified RAID
group. Non Seq Reads RAID groups
The total backend tracks loaded in
sequential mode for a specified RAID
group. Seq Reads
The total backend tracks destaged for
a specified RAID group. Writes
The average I/Os on the port over an
entire collection interval. Max IOPS Ports
The maximum MB/s of data that was
read from or written to an LDEV through
the port. Max MBPS
The total size of the CLPR shown in
MB/s. Cache Size CLPRs
the utilization of the sidefile shown as
a percentage value. Side File Usage %
To view data for the additional set of metrics:
1.
Based on whether you want to view the additional data in the LDEV, Port, CLPR, or the RAID
Group table, navigate to the corresponding Metrics list.
2. Select the check box for the metrics, for which you want to view the related component data.
A new column for the selected metric is added in the respective table and the component data
pertaining to the selected metric is displayed under that metric column.
In the above image, the Seq Reads metric is selected. The performance data of components
pertaining to Seq Reads is displayed in a separate column in the RAID Group table.
Viewing variations in the LDEV response time
You can identify the LDEVs that are experiencing response time variations by analyzing their read
and write response time values.
Consider a scenario where your application is associated with multiple LDEVs and experiencing
a slow response time. As some of the components, such as RAID groups are shared, their utilization
334 Troubleshooting issues for components associated with applications