HP XP Performance Advisor Software - Manual (Page 60)

•
If you are collecting the performance data for the first time, it takes longer than usual for HP
XP P9000 Performance Advisor to collect the data. The subsequent performance data collection
is as per the time specified in the Frequency section.
•
If you have performed a one-time configuration data collection and later the XP or the P9000
disk array configuration is modified, HP recommends that you perform a fresh configuration
data collection, so that the performance data collected is for the latest configuration.
Initially, when performance data collection is not yet configured for the XP and the P9000 disk
arrays, the following details are displayed in the Performance Collection table, under the
Performance Collection tab:
Description Screen elements
Displays the DKC number of the XP or the P9000 disk
array. Array
Displays the system name of the host. Host ID
Displays the port that is configured to communicate data
between the command device on an XP or a P9000 disk
array and the associated host. Port
Displays the LDEV ID of the LDEV that is configured as a
command device. Cmddev
Displays the device file for the command device. DeviceFile
No schedule name. Schedule Name
Displays 0,0,0 Frequency (DKC, RG, Port)
Displays
Enabled
Displays the View link, clicking which displays empty
schedule, as the schedule is not yet created. Components
Related Topics
•
“Viewing a performance data collection schedule” (page 68)
•
“Editing frequency of performance data collection” (page 68)
•
“Starting performance data collection” (page 69)
•
“Deleting performance data collection schedule” (page 70)
•
“Restarting the performance data collection in case of a disk failure” (page 67)
•
“Starting real-time performance data collection” (page 319)
60 Collecting configuration and performance data