HP ProLiant DL740 Server - Manual (Page 55)

Installing the Server in a Rack
WARNING: To reduce the risk of personal injury or damage to the equipment,
be sure that:
• The leveling jacks are extended to the floor.
• The full rack weight rests on the leveling jacks.
• The stabilizing feet are attached to the rack if it is a single rack installation.
• The racks are coupled together in multiple rack installations.
• A rack may become unstable if more than one component is extended for
any reason. Extend only one component at a time.
CAUTION: To maintain optimum cooling, a perforated rack door must be used with
this server. Failure to use a properly ventilated door results in thermal damage to the
server. Compaq 7000 series racks require an upgraded door. To order a high-airflow
perforated door from HP, request P/N 327881-B21 for a 42U rack, or P/N
157847-B21 for a 22U rack.
IMPORTANT: To reduce the overall weight of the system, HP recommends that the host
module and the power and media module be removed from the server before loading it onto
the rails.
IMPORTANT: Refer to the following rack documentation for further cautions:
• 9000 Rack Series Products Audio-Visual (AV) CD Kit (shipped with HP racks)
• Rack Builder Pro Configuration Tool CD (available on the HP website or ordered with the
Rack Resource CD Kit)
• Rack Products Documentation CD (available on the HP website or ordered with the Rack
Resource CD Kit)
• The Rack 7000/4000 Series Rack Resource CD Kit ships with all Compaq 7000 and 4000
Series Racks.
2-12 HP ProLiant DL740 Server User Guide
HP CONFIDENTIAL
Writer: Anna Roberts File Name: c-ch2 Installing the Server in a Rack.doc
Codename: Expedition Part Number: 270854-002 Last Saved On: 6/17/03 2:00 PM