HP XP20000XP24000 Disk Array - Manual (Page 30)

indicates the status of the volume. The number on the left of the first colon (:) from the
left is the LDKC number. The number on the left of the second colon (:) from the left is
LDEV
the CU image number. The number on the right of the second colon is the LDEV number
An icon showing the status of the volume is displayed on the left of the ID.
Emulation Indicates the emulation type of the volume (LVI or LUN).
Capacity Indicates the capacity of the volume.
Indicates the average usage rate for the parity group.
If an exclamation mark (!) is displayed, the reported usage rate is likely to be
inaccurate, because the volumes may be moved by Auto LUN or formatted by HP
Ave. (%)
StorageWorks XP Virtual LVI or Open Volume Management.
If a plus mark (+) is displayed before 0, such as +0, the usage rate is not completely
0 but less than 1.
Indicates the maximum usage rate for the parity group.
Max (%)
If an exclamation mark (!) is displayed, the reported usage rate is likely to be
inaccurate, because the volumes may be moved by Auto LUN or formatted by Virtual
LVI or Open Volume Management.
The following are volume icons, contained in parity groups and external volume groups, that
can appear in the tree.
Note : The volumes contained in an external volume group are called external volumes. In the
tree of Manual Plan tab, volumes in a parity group and external volumes are expressed by
the same icons.
Volume icons:
indicates a normal volume that can be migrated to a different parity group but cannot be
used as a migration destination.
•
• (blue) indicates a reserved volume of Auto LUN. This volume is reserved as a migration
destination by Auto LUN.
When you specify a source volume in the Manual Plan window, Auto LUN checks these
reserved volumes to find volumes that can be used as target volumes. If Auto LUN finds a
reserved volume that can be used as target volumes, Auto LUN changes the volume icon to
• (green) indicates a reserved volume of other programs. This volume is reserved by a
program other than Auto LUN, therefore, Auto LUN cannot operation it.
• indicates a volume that can be used as a migration destination.
• indicates a volume that is being migrated, or a normal volume that is registered in a
migration plan. A volume that is being migrated by a program other than Auto LUN is also
indicated by this icon.
, (blue), (green), and . Among these icons, you can specify as a source volume.
• Target Button: After selecting the volume to migrate in the Source LDEV, click the Target button.
This list of LDEVs in the Target (Reserved) LDEV are displayed.
• Target (Reserved) LDEV: The list of volumes that volume migration is possible corresponding to
the Source LDEV appear. Select a row to specify the Target LDEV. Specify the target volume
which is the destination volume in the text box. The usage rate for parity groups before volume
migration and the estimated usage rate for parity groups after volume migration is displayed
on the right of the text box.
Items displayed in the list are as follows.
.
30 Using the Auto LUN GUI