HP XP Array Manager Software - Manual (Page 31)

Table 6 Multi Set dialog box details (continued)
Description Item
LDEVs in the selected CU image are available for the Multi
Set function. Note that only volumes owned by the CLPR
selected from the CLPR list in the Cache Residency window
are shown in the LDEV table.
•
LDEV displays the LDEV number. An LDEV number that
ends with a # mark indicates that the LDEV is an
external volume (for example, 01#).
• Size indicates the size of the LDEV.
•
Emulation displays the emulation type of the LDEV.
•
RAID displays the RAID level of the LDEV. A dash (-) is
displayed if the LDEV is an external volume.
LDEV information table
Saves the requested Set operations and closes the Multi
Set dialog box. Set
Closes the Multi Set dialog box without saving the
requested operations. Cancel
Multi Release Dialog Box
The Multi Release dialog box (see “Multi Release Dialog Box” (page 31) ) allows you to release
Cache Residency data from cache for more than one LDEV. To open the Multi Release dialog box,
select an LDEV that has all the data stored in Cache Residency cache, check the Multi Set / Release
box, and then click Release.
The Multi Release function applies only to LDEVs that have all data stored in Cache Residency. To
release individual cache extents, you must select the cache extents in the LDEV information table
and use the Release button to request data operations.
Table 7 (page 32) describes the details of the Multi Release dialog box.
Figure 12 Multi Release Dialog Box
Multi Release Dialog Box 31