Embedded web server sections, 78 chapter 9 manage and maintain enww – HP Color LaserJet CP2025 Printer series User Manual
Page 88
Embedded Web server sections
The table below describes the basic screens of the embedded Web server.
Tab or section
Description
Status tab
Provides product, status, and
configuration information.
●
Device Status: Shows the product status and shows the life remaining of
HP supplies, with 0% indicating that a supply has reached the end of its estimated
life.
●
Supplies Status: Shows the approximate life remaining of HP supplies, with 0
percent indicating that a supply has reached the end of its estimated life. This page
also provides supplies part numbers.
●
Device Configuration: Shows the information found on the product Configuration
page.
●
Network Summary: Shows the information found on the product Network
Configuration page.
●
Print Info Pages: Allows you to print the PCL, PCL6, PS Font Lists, and the supplies
status page that the product generates.
●
Color Usage Job Log: Shows user color print jobs on a job-by-job basis.
●
Event Log: Shows a list of all product events and errors.
●
Support button: Provides a link to the product support page. The Support button
can be password-protected; see
●
Shop for Supplies button: Provides a link to a page where you can order supplies
for the product. The Shop for Supplies button can be password-protected; see
Settings tab
Provides the ability to configure the
product from your computer.
●
Device Information: Allows you to name the product and assign an asset number
to it. Enter the name for the primary contact who will receive information about the
product.
●
Paper Handling: Allows you to change the paper-handling defaults for the product.
●
Printing: Allows you to change the printing defaults for the product.
●
PCL 5c: Allows you to change the PCL 5c defaults for the product.
●
PostScript: Allows you to change the PostScript defaults for the product.
●
Print Quality: Allows you to change the print quality defaults for the product,
including calibration settings.
●
Print Density: Allows you to change the contrasts, highlights, midtones, and
shadows values for each supply.
●
Paper Types: Allows you to configure print modes that correspond to the media
types that the product accepts.
●
System Setup: Allows you to change the system defaults for the product.
●
Service: Allows you to start the cleaning procedure on the product.
●
Support button: Provides a link to the product support page. The Support button
can be password-protected.
●
Shop for Supplies button: Provides a link to a page where you can order supplies
for the product. The Shop for Supplies button can be password-protected.
78
Chapter 9 Manage and maintain
ENWW