HP XP Array Manager Software - Manual (Page 57)

Return Codes, Output Messages, and Error Codes 5-3
Hitachi Cache Manager User’s Guide
Output Messages
The output message for HRUDCRX is stored in a sequential dataset. The
message includes input control statements, which are printed out with each
command followed by the result of the command execution. If you want to
print out cache statistics information, specify COUNTS and then REPORT. If
you want to print out status information, specify STATUS and then REPORT.
The output for HRUDCRT is displayed on a TSO terminal. If you want to display
statistics information, specify COUNTS and then REPORT. If you want to
display status information, specify STATUS and then REPORT.
Both HRUDCRX and HRUDCRT messages contain a nine-character ID
statement, formatted as follows: JSEnnnI-C. In this example, JSE indicates a
message, nnn indicates the message number, and I-C indicates the severity
code. (S) indicates an action by the Cache Manager utility, and (P) indicates
an action by the user.
The severity codes are as follows:
• I indicates that all commands were successfully implemented.
• W indicates that the process was completed, but there is an attention
message.
• E indicates that an error occurred during the command execution, and the
process ended abnormally. The listed commands (if specified) will be
executed.
• S indicates that a serious error occurred during the command execution,
and the process ended abnormally. The listed commands (if specified) were
skipped.
• U indicates that a serious error occurred during the command execution,
and the process ended abnormally. The specified commands were skipped.