HP Storage Mirroring V5 Software - Manual (Page 21)

21 of 49
folders, and files that you will be unable to exclude, because they are required for
migration. For example, the boot volume cannot be excluded because that is
where the system state information is stored. Volumes, folders, and files that are
marked with a checkmark are included. If there is no checkmark, the item is
excluded. Expand and collapse the directory tree and click on an item to add or
remove a checkmark. Once you have configured the data to migrate, click Next to
continue.
Note:
The Select all and Deselect all buttons allow you to quickly select or
deselect all user data on your server. These buttons do not change the
selection of system state data, which is defined by Storage Mirroring Data
Migration and cannot be modified manually.
7. Specify if your target server is in a LAN or WAN environment with respect to your
source.
●
LAN migration—If your migration is across a LAN, the source name and the
IP address(es) will be applied to the target server. Specify which network
adapters on the target that you want to take over for the network adapters on
the source.
●
WAN migration—If your migration is across a WAN, the source name will be
applied to the target server, but the IP address(es) of the source will not be
used. Instead, the IP address(es) of the target will be used. If desired, you
can select to Update DNS Servers, which will allow you to specify how to
resolve server names and IP addresses. If you do not select Update DNS
Servers, you must manually modify DNS after the migration is complete.
8. Click Next to continue.
9. If you selected to update your DNS servers for a WAN migration, specify your DNS
update options.
●
DNS Domains—Click Add and specify the name of your DNS Domain.
Repeat this for each DNS domain. If you want to remove a domain, highlight
the name and click Remove.
●
User name—Highlight a DNS domain and specify a user account that has
privileges to update DNS.
●
Password—Specify the password associated with the user account you
entered.
●
DNS Servers—Click Add and specify the IP address of a DNS server in the
DNS domain. Repeat this for each DNS server in the DNS domain. If you
want to remove a server, highlight the address and click Remove.
●
IP addresses—Click Add and specify an IP address on the source and the
IP address on the target that will take over for that source IP address. Repeat