HP Color LaserJet Enterprise M750 Printer series - Manual (Page 96)

Manage supplies and accessories
Print when a cartridge is at estimated end of life
Supplies messages
● <Color> <Supply> Low—where <Color> is the color of the supply, and <Supply> is the type of
supply. The product indicates when a supply level is low. The actual print cartridge life remaining
can vary, but the supply does not need to be replaced now. Consider having a replacement
cartridge available to install when the print quality is no longer acceptable. This alert appears
only when <Color> <Supply> Very Low is set to Stop .
● <Color> <Supply> Very Low. The product indicates when a supply level is very low. The actual
print cartridge life remaining can vary. Consider having a replacement cartridge available to
install when the print quality is no longer acceptable. Once an HP supply has reached very low,
the HP Premium Protection Warranty on that cartridge has ended.
Print-quality problems can occur when using a supply that is at its estimated end of life. The print
cartridge does not need to be replaced at this point in time unless the print quality is no longer
acceptable.
Enable or disable the Very Low Settings options from the control panel
You can enable or disable the default settings at any time, and you do not have to re-enable them
when you install a new cartridge.
1. At the product control panel, press the Home button .
2. Open the following menus:
● Administration
● Manage Supplies
● Supply Settings
● Black Cartridge or Color Cartridges
● Very Low Settings
3. Select one of the following options:
● Select the Continue option to set the product to alert you that the cartridge is very low, but
to continue printing.
NOTE: Using the Continue option allows printing beyond Very Low without customer
interaction and can result in unsatisfactory print quality.
● Select the Stop option to set the product to stop printing (including printing faxes) until you
replace the cartridge.
● Select the Prompt to continue option to set the product to stop printing (including printing
faxes) and prompt you to replace the cartridge. You can acknowledge the prompt and
continue printing.
If you select the Stop or Prompt to continue option, the product stops printing when it reaches the
Very Low threshold. When you replace the cartridge, the product automatically resumes printing.
86 Chapter 6 Manage and maintain ENWW