HP StorageWorks IP Storage Router - Manual (Page 84)

Configuring the Storage Router
84 IP Storage Router SR2122-2 User Guide
High availability
(HA) cluster name
The name of the cluster in which the storage router is to
participate. Clusters are multiple storage routers that back
each other up in case of hardware or software failure. All
storage routers that participate in a cluster must have the
same cluster name.
Required only if
clustered was
specified for
the HA
configuration
High availability
(HA) IP address and
subnet mask
The IP address and subnet mask of the storage router HA
interface. The HA interface and management interface
must be on unique IP networks. If the storage router is to
participate in a cluster, the HA IP address is required; if the
storage router is a standalone machine, it is optional.
Note: The HA interface for each storage router in a cluster
must be on the same IP subnet.
Required only if
clustered was
specified for
the HA
configuration
Primary DNS IP
address
The IP address of the primary domain name server to be
accessed by the storage router. Required if you refer to any
other server via name rather than IP address.
Optional
Secondary DNS IP
address
A backup domain name server from which the storage
router can request services when the primary DNS is
unavailable.
Optional
NTP server IP
address
The IP address of the NTP server available to the storage
router. This allows the storage router to keep the date and
time synchronized with the rest of the network.
Optional
Time zone, current
date and time
The format for the date is mm/dd/yyyy, and the time is
hh:mm:ss.
Optional
Enable Telnet on all
interfaces
Enable Telnet access on all interfaces. By default, Telnet
access is enabled on only the management interface.
Optional
SNMP read
community name
The name of the community having read-only access to the
storage router network. The storage router will respond to
this community’s GET commands. The default is public.
Optional
SNMP write
community name
The name of the community having write access to the
storage router network. The storage router will respond to
this community’s SET commands. The default is private.
Optional
First SNMP trap
manager IP address
The IP address of the first destination host used for SNMP
notifications (traps). Required if you wish to use SNMP
traps.
Optional
Trap version for first
SNMP IP address
The version number of the traps that are to be sent to the
first SNMP trap manager IP address. The default is 1.
Optional
Second SNMP trap
manager IP address
An optional IP address of the second destination host used
for SNMP notifications (traps).
Optional
Configuration
Item Description
Required or
Optional