HP ProLiant DL120 G7 Server - Manual (Page 33)

Hardware options installation 33
Installing a hot-plug drive
IMPORTANT: Hot-plug capability and drive LED support are only available when a supported
optional controller is installed in the server.
1. Power down the server (on page 17 ).
2. Remove the existing drive blank (" Removing a drive blank " on page 31 ).
3. Prepare the drive.
4. Install the drive.
Optical drive option
To install the component:
1. Power down the server (on page 17 ).
2. Remove the server from the rack (on page 17 ).