HP Deskjet 6940 - Manual (Page 77)

Auto Two-Sided Print Accessory with Small Paper Tray
The two-sided printing accessories only support certain paper types. For a list of
supported paper types, see the documentation that came with the accessory.
If a two-sided printing accessory is not attached to the printer or you are printing on an
unsupported paper type, use
manual two-sided printing .
Binding type
Select the type of binding that you want for the two-sided document, and then follow the
steps for that binding:
Book binding Tablet binding
Note Book binding is the most common type of binding.
Book binding
Follow these steps to print a two-sided document with a book binding:
1.
Open the Printer Properties dialog box.
2. Click the Printing Shortcuts tab, and then click Two-sided, duplex, printing in the
drop-down list.
3. In the Print on both sides drop-down list, click Automatically.
4. Select any other print settings that you want, and then click OK.
After the first side of the page is printed, the printer pauses while the ink dries. When the
ink is dry, the paper is pulled back into the duplexer and the reverse side of the page is
printed.
Note Do not remove the paper from the printer until both sides of the page have
been printed.
Tablet binding
Follow these steps to print a two-sided document with a tablet binding:
1.
Open the Printer Properties dialog box.
2. Click the Finishing tab.
3. Select the Print on both sides check box.
(continued)
User's guide 75