HP XP7 Storage - Manual (Page 188)

Message ID Message Text Explanation
(Displays Information) on page
6-25 .
KAPL01154-W The dynamic I/O path control
function is already set to aa...aa
for the system.
Details
aa...aa: on or off
Action
Use the view operation of the
HDLM command (dlnkmgr) to
check the setting for the host,
storage, and LUs. For details on
the view operation, see view
(Displays Information) on page
6-25 .
KAPL01155-W The dynamic I/O path control
function is already set to aa...aa
for storage.
Details
aa...aa: on or off
Action
Use the view operation of the
HDLM command (dlnkmgr) to
check the setting for storage. For
details on the view operation, see
view (Displays Information) on
page 6-25 .
KAPL01158-E Dynamic I/O path control cannot
be applied to the specified
storage.
Action
Use the view operation of the
HDLM command (dlnkmgr) to
check the path ID. For details on
the view operation, see view
(Displays Information) on page
6-25 .
KAPL01167-I All paths will be set to Online or
Online(D). Is this OK? [y/n]: Details
All paths will be set to Online or
Online(D) because no path is
specified. To continue, enter y. To
cancel the operation, enter n.
Action
To set all paths to Online or
Online(D), enter y. To cancel the
operation, enter n. Before you
execute the processing, you must
check the path status by
executing the view operation of
the HDLM command dlnkmgr.
KAPL01168-I All P-VOL paths that are
connected to the LU that has the
specified path ID will be set to
Online(D). Is this OK? [y/n]:
Details
All paths for each specified LU will
be set to Online or Online(D). To
continue, enter y. To cancel the
operation, enter n.
8-24
Messages
Hitachi Dynamic Link Manager (for VMware®) User Guide