Executing the dlmrmcenv utility -13, Specify windows firewall settings -13 – HP XP7 Storage User Manual
Page 65
In addition, if you add the host by specifying the host name from Global
Link Manager, configure the settings so that the host name of the ESXi
host on the remote management client can be resolved to the IP address.
The Credential Store file stores the host information (host name, user name,
and password) that is managed by VMware vSphere CLI.
The default storage location of the Credential Store is as follows:
%APPDATA%\VMware\credstore\vicredentials.xml
To add a host to the Credential Store file, execute the VMware vSphere CLI
script (credstore_admin.pl).
Executing the dlmrmcenv utility
The dlmrmcenv utility registers the user account created in
into the remote management client.
To execute the utility:
1
.
Log on to Windows on the remote management client as a member of the
Administrators group.
2
.
Start the VMware vSphere CLI.
3
.
From the VMware vSphere CLI, execute the dlmrmcenv utility.
dlmrmcenv [--username "user-account-name"] [--credstore
"Credential-Store-file-path"]
If the name of the user account created in
is GLMUser, you can omit the --username parameter.
If the Credential Store file is stored in the default folder, you can omit the
--credstore parameter.
4
.
Check that the KAPL20907-I message is displayed, indicating that the
utility ended successfully.
Specify Windows Firewall settings
If Windows Firewall is enabled on the remote management client, the
following ports used by Hitachi Command Suite Common Agent Component
must be registered in the Windows Firewall exceptions list:
•
Port set for the server.agent.port property (default: 24041/tcp)
•
Port set for the server.http.port property (default: 24042/tcp)
•
Port set for the server.http.localPort property (default: 24043/tcp)
For details about the ports used by the Hitachi Command Suite Common
Agent Component, see the manual Hitachi Command Suite Global Link
Manager Installation and Configuration Guide.
To add the ports to the exceptions list:
1
.
Launch the Administrator: Command Prompt window.
Creating an HDLM Environment
3-13
Hitachi Dynamic Link Manager (for VMware®) User Guide