HP StorageWorks 2.128 SAN Director Switch - Manual (Page 131)

Fabric OS 5.x administrator guide 131
For example:
For more information on how the overall switch status is determined, see the
switchStatusPolicySet
command in the HP StorageWorks Fabric OS 5.x command reference guide.
Displaying switch information
1. Connect to the switch and log in as admin.
2. Issue the
switchShow
command. This command displays the following information for a switch:
•
switchname
displays the switch name.
•
switchtype
displays the switch model and firmware version numbers.
•
switchstate
displays the switch state: Online, Offline, Testing, or Faulty.
•
switchrole
displays the switch role: Principal, Subordinate, or Disabled.
•
switchdomain
displays the switch Domain ID.
•
switchid
displays the embedded port D_ID of the switch.
•
switchwwn
displays the switch WWN.
•
switchbeacon
displays the switch beaconing state: either ON or OFF.
The
switchShow
command also displays the following information for ports on the specified switch:
• Module type: The SFP type, if an SFP is present.
• Port speed: The speed of the Port (1G, 2G, 4G, N1, N2, N4, or AN). The speed can be fixed,
negotiated, or auto-negotiated.
• Port state: The port status.
• Comment: Information about the port. This section might be blank or display the WWN for the
F_Port or E_Port, trunking state, upstream or downstream status.
The details displayed for each switch differ for different switch models. For more information, see the
switchShow
command in the HP StorageWorks Fabric OS 5.x command reference guide.
Displaying the uptime for a switch
1. Connect to the switch and log in as admin.
2. Issue the
uptime
command.
switch:admin> switchstatusshow
Switch Health Report Report time: 03/21/2005 03:50:36 PM
Switch Name: SW3900
IP address: 10.33.54.176
SwitchState: MARGINAL
Duration: 863:23
Power supplies monitor MARGINAL
Temperatures monitor HEALTHY
Fans monitor HEALTHY
WWN monitor HEALTHY
Standby CP monitor HEALTHY
Blades monitor HEALTHY
Flash monitor HEALTHY
Marginal ports monitor HEALTHY
Faulty ports monitor HEALTHY
Missing SFPs monitor HEALTHY
All ports are healthy
switch:admin>