HP StoreEver MSL Tape Libraries - Manual (Page 50)

Solution Cause Message Code
• Power cycle both Libraries.
• Run the Library Extender
cycle test. See Table 8 , page 50.
Library Extender has reported
an error condition.
BD
• Download the current lib-
rary extender firmware
bundle to update the Librar-
ies to compatible firmware
versions.
• Retry the operation.
The Extender is incompatible
with the Libraries, or the firm-
ware versions on the Libraries
and Extender are incompatible
with each other. See
Table
9 , page 52.
Extender or library stack incom-
patibility.
BE
Table 6 Sub-codes for error B8
Message Sub-code
Library Extender expected 40
Lower Library expected 41
Master Library expected 42
Table 7 Sub-codes for error B9
Message Sub-code
No device present 31
I²C write error 32
I²C read error 33
Table 8 Sub-codes for error BD
Solution Cause Message Sub-code
• Power cycle the master
Library.
• Run the Library Extender
cycle test.
• Retry the operation.
The Extender robotic cannot
locate its home position within
the master Library.
Sensor master home not found. 01
• Power cycle the lower Lib-
rary.
• Run the Library Extender
cycle test.
• Retry the operation.
The Extender robotic cannot
locate its home position within
the lower Library.
Sensor lower home not found. 02
Using diagnostic tools and troubleshooting 50