Releasing the magazine – HP StoreEver MSL Tape Libraries User Manual
Page 66
4.
To manually release a magazine, push the end of a small metal pin or straightened paper clip
until you feel some resistance, about 1.5 cm (0.6 inch), into the magazine access hole to depress
the magazine release tab. While holding in the release tab, have a second person attempt to
pull the magazine out of the front of the unit. For the MSL4048 and MSL8096, all magazines
on a side are released and may be removed at the same time. See
Figure 39 Releasing the magazine
.
Push a metal pin or paper clip into the access hole.
1.
Pull the magazine out of the front of the unit.
2.
IMPORTANT:
Do not force the pin once you encounter resistance. Doing so can damage the Library.
5.
Repeat
for the other magazine if necessary.
6.
If other tapes are still in the device, or if you were unable to manually remove the magazines,
contact HP customer service for assistance.
Servicing the Library Extender
66