HP LaserJet 4250 - Manual (Page 166)

Control panel message Description Recommended action
66.XY.ZZ OUTPUT
DEVICE FAILURE
An error occurred in an external paper-
handling accessory. 1. Turn the printer power off.
2. Check that the accessory is properly
seated on and connected to the
printer, without any gaps between
the printer and the accessory. If the
accessory uses cables, disconnect
and reconnect them.
3. Turn the printer power on.
4. If the error reappears, record the
message, and contact HP Customer
Support. (See
HP customer care .)
68.X PERMANENT
STORAGE FULL
For help press
alternates with
68.X PERMANENT
STORAGE FULL
To continue press
The printer permanent storage is full.
Some settings might have been reset to
the factory defaults. 1. If the error does not clear, turn
printer off then on.
2. Print a configuration page and
check the printer settings to
determine which values have
changed. See
Configuration page .
3. Turn the printer power off, then
press and hold
M
ENU
while turning
the printer on to clean up permanent
storage.
4. If the error reappears, record the
message and contact an HP-
authorized service or support
provider (see
HP customer care ).
68.X PERMANENT
STORAGE WRITE FAIL
To continue press
The storage device is failing to write.
Printing can continue, but there might be
some unexpected behaviors because an
error occurred in permanent storage. Press ( S
ELECT
button) to continue.
If the error does not clear, turn the
printer off then on. If error reappears,
record the message and contact an HP-
authorized service or support provider
(see
HP customer care ).
68.X STORAGE ERROR
SETTINGS CHANGED
For help press
alternates with
68.X STORAGE ERROR
SETTINGS CHANGED
To continue press
An error occurred in the printer
permanent storage and one or more
printer settings has been reset to its
factory default. Press ( S
ELECT
button) to clear the
message, and press ( S
ELECT
button)
to resume printing.
Print a configuration page and check the
printer settings to determine which
values have changed. See
Configuration
page .
If the error does not clear, turn printer off
then on. If the error reappears, record
the message and contact an HP-
authorized service or support provider
(see
HP customer care ).
Interpreting control-panel messages (continued)
154 Chapter 4 Problem solving ENWW