HP LaserJet 4250 - Manual (Page 255)

Printer memory
You might want to add more printer memory to the printer if you often print complex
graphics, print PostScript (PS) documents, or use many downloaded fonts. Added memory
also gives you more flexibility in supporting job-storage features, such as quick copying.
To install printer memory
CAUTION Static electricity can damage DIMMs. When handling DIMMs, either wear an antistatic wrist
strap or frequently touch the surface of the DIMM antistatic package, then touch bare metal
on the printer.
The HP LaserJet 4250 or 4350 series printers come with one DIMM installed in slot 1. A
second DIMM can be installed in slot 2. If desired, you can replace the DIMM installed in slot
1 with a higher-memory DIMM.
If you have not already done so, print a configuration page to find out how much memory is
installed in the printer before adding more memory. (See
Configuration page .)
1. Turn the printer power off.
2. Unplug the power cord and disconnect any cables.
3. Grasp the cover on the right side of the printer and pull it firmly toward the rear of the
printer until it stops.
ENWW Printer memory 243