Allied Telesis AT-FS238a/2 - Manual (Page 14)

Overview
2
The fiber optic port operates at 100 Mbps, while the twisted pair port operates
at 10 Mbps or 100 Mbps. Both ports feature half- and full-duplex operation.
AT-FS238a/x and AT-FS238b/x Series Bridging Converters can be installed on
a desktop or in an AT-MCR12 chassis. These bridging converters are easy to
install and do not require software configuration or management.
Note
The AT-FS238a/x and AT-FS238b/x Series Bridging Converters are
designed to be used in pairs; therefore, the AT-FS238a/x fiber port must
be connected to the AT-FS238b/x fiber port only.
Figure 1 illustrates the front panel of the AT-FS238a/x Series Bridging
Converter.
Figure 1 AT-FS238a/x Series Front Panel (AT-FS238a/1 Model)
Figure 2 illustrates the front panel of the AT-FS238b/x Series Bridging
Converter.
Figure 2 AT-FS238b/x Series Front Panel (AT-FS238b/1 Model)