HP StorageWorks 2.32 Edge Switch - Manual (Page 121)

HA-Fabric Manager user guide 121
• Operators: =, <, <=, >, >=
Applying rules for plan evaluation
To apply rules for evaluating the plan:
1. Select View > Planned SAN from the HAFM menu bar.
Table 14 Connection rules
Syntax Description
do_not_connect (device=x) Never connect device x to device x .
do_not_connect (device=x) to
(device=y)
Never connect device x to y .
do_not_connect (device=x) to
(device=y) through (device=z)
Never connect device x to y through z .
do_not_attach (device=x) to
(device=y)
Never connect device x into a SAN that
has device y .
connect (device=x) Always connect device x to device x .
connect (device=x) to (device=y) Always connect device x to y .
connect (device=x) to (device=y)
through (device=z)
Always connect device x to y through z .
Table 15 Property validation rules
Syntax Description
check_for_valid ‘PropertyName’ for
(device=x)
Device x must have valid
‘ PropertyName’ .
‘PropertyName’
should_be_unique_in ‘Types‘
Cannot have duplicate
‘ PropertyName ’ in the
same ‘ Types ’.
Table 16 Capacity control rules
Syntax Description
total_connections (device = x)
‘Operator’ 2
The sum of connections to
device x should be
‘ Operator ’ than
2total_connections.
(device = x) ‘Operator’
MAXPORTS
The sum of connections to
device x should be
‘ Operator ’ than MAXPORTS.
total_connections (device = x) to
(device = y) ‘Operator’ 2
The sum of connections from
device x to device y should be
‘ Operator ’ than 2.