Accessing santegrity security center tabs, Using the users tab – HP StorageWorks 2.32 Edge Switch User Manual
Page 145
HA-Fabric Manager user guide 145
If the security settings for a switch or director are changed by another management interface, then
the following occurs:
•
If the switch that was changed by another interface is not currently configured by your HAFM
appliance user, the top table accepts the changes, and an event is generated in the Security
Log.
•
If the changes made by another interface affect the switch whose security data is currently being
modified by a security administrator, a message displays indicating the security settings have
been changed by an external source. The message asks you if you want to load the new settings
from the switch or keep your changes.
• Click Load New Settings—The information appears in the display on the top table and
configuration on the bottom tab update. All working data is overridden by the new data in
the switch.
• Click Keep Changes—The updates are made to the switch, but you may maintain the
configuration both on the top table and bottom tab. If needed, these changes may be
overridden with the current configuration.
Accessing SANtegrity Security Center tabs
There are five tabs in the Authentication section:
•
Users—Allows the security administrator to set up users accessing the switch from CLI and web
interfaces.
•
Software—Allows the security administrator to set up software applications that can
communicate with the switch through API, as well as OSMS authentication.
•
Device—Allows the security administrator to set device-to-device authentication parameters. The
Device tab is PFE key-enabled. If a proper PFE key is not provided, the Device tab is not
accessible.
•
IP Access Control List—Allows the security administrator to set up IP addresses that can
manage the switch.
•
Radius Server—Allows the security administrator to set Radius server parameters that the
switch can use to pass on the authentication information to the designated Radius servers.
Using the Users tab
The Users tab lets the security administrator set up role-based user access to the selected switch
through other management interfaces, such as EWS or Telnet.