HP NonStop G-Series - Manual (Page 140)

G4SA SAC
A ServerNet addressable controller mounted on a G4SA (Gigabit Ethernet 4-port ServerNet adapter).
Each G4SA SAC contains up to four G4SA PIF s, which correspond to the four Ethernet ports on each G4SA.
Location in OSM Tree: System > Group > IOAM Enclosure > IOAM > G4SA > G4SA SAC
Example: G4SA SAC $ZZLAN.G4SA1.0
Attributes
G4SA SAC
Displayed in the Attributes tab and Attributes dialog box only if the value is something
other than OK.
Values
Service State
Logical
Indicates whether the SAC boot firmware is automatically reloaded if it terminates
abnormally.
Enabled: The boot firmware is automatically reloaded.
Disabled: The boot firmware is not automatically reloaded.
Unknown: Automatic Boot state could not be read.
Automatic Boot State
Indicates whether the SAC will dump information about the reasons the SAC aborts
operations.
Values, as established through the SCF AUTODUMP command, are:
Disabled: Indicates that the SAC will not autodump.
Enabled: Indicates that SAC will autodump.
Extended: Indicates that additional information is dumped. The size of an extended
G4SA dump file is significantly larger. Use this option only at the direction of HP
service provider.
Automatic Dump State
The state of the component as known to the operating system on the server. Values Device State
The file name of the operational firmware running on the SAC. Download File Name
The version of the operational firmware running on the SAC. Download File Version
Displays the default naming convention for dump files. The default value
($SYSTEM.SYS00.C061D00) can be altered in SCF. The first dump file name ends
in 00. Each subsequent dump file automatically receives the next sequential number. Dump File Name
The processor to which the G4SA SAC is connected. Owning Processor
The currently available processors that can access the resource.
Example: 0,1,4,8,9 Processor Access List
Firmware
The version of the boot firmware for the SAC. Version
The name of the file to be used for a (boot) Firmware Update . Default File Name
The version of the firmware to be used for a (boot) Firmware Update . Default File Version
The differences, if any, between the current and default boot firmware versions.
Values
Compare State
Actions
Abort
Terminates operation of the G4SA ServerNet addressable controller. When the Abort action finishes, the SAC is in
the Stopped state.
140 System Resources