HP Designjet T3500 Production eMFP - Manual (Page 101)

NOTE: The use of USB flash drives with your printer may be disabled in the Embedded Web
Server (Setup > Security > Disable USB drives).
● In a network folder (a folder on a computer that is accessible through the network)
NOTE: The network folder option will not work unless the network folder has been correctly set
up and identified in the Embedded Web Server or HP Utility: see Configure a scan-to-network or
scan-to-FTP folder on page 21 .
TIP: To check the currently-configured network folder, go to the front panel and press ,
then .
● In HP Designjet SmartStream; it will only appear if you have this accessory installed.
NOTE: If the scanner is later unable to store your file in the chosen destination (USB flash drive or
network folder), you are given the opportunity to change your mind and use the other alternative.
4. Some of the default scan settings are displayed. Press Settings to see the complete list of settings, and
check in particular that the Original type setting corresponds to the paper type that you intend to scan.
● Format allows you to specify the format of the file in which the scanned image will be saved: TIFF,
JPEG or (with the PostScript upgrade only) PDF.
● Compression allows you to specify the level of compression: maximum, high (the default level),
medium, or low. This option is available if the format is JPEG or PDF.
● Resolution allows you to specify the scan resolution: Standard (200 dpi), High (300 dpi), or Max
(600 dpi).
● Color options allows you to choose color, grayscale or black and white scanning.
● Content type allows you to optimize the scan for a line drawing, a photographic image, or a mixed
image.
● Original paper type allows you to specify the paper type on which the original image has been
printed. To optimize scan quality, ensure that this setting is correct.
● Blueprints invert allows you to generate a scanned image with a light background. It is useful
when the original you intend to scan is a blueprint with a dark background. This option is available
only if the Original type is set to Blueprints.
● Background removal allows you to remove unwanted background color. You can specify the
strength of this setting, from 0 to 10.
● De-skew the scanner has a built-in automatic de-skew algorithm, which measures the skew in the
original, and rotates the scanned image so that the result is perfectly straight.
● Full width margins are not detected doing a complete scan.
● Job storage with two options; Scan and delete (job is not stored in the job queue), and Scan and
store (the job is kept in the job queue).
● Destination (only available if you have selected the scan to network folder) to choose the
destination folder.
ENWW Scan to file 91