HP Designjet T3500 Production eMFP - Manual (Page 57)

To access the Embedded Web Server on any computer, open your Web browser and give the IP address of
your printer.
You can see your printer's IP address on the front panel by pressing and then .
You can also access the Embedded Web Server from the HP Designjet Utility or HP Utility.
If you have followed these instructions but failed to get through to the Embedded Web Server, see Cannot
access the Embedded Web Server on page 245 .
Change the language of the HP Utility
The HP Utility can work in the following languages: English, Portuguese, Spanish, Catalan (Windows only),
French, Italian, German, Polish, Russian, Simplified Chinese, Traditional Chinese, Korean and Japanese.
● Under Windows, select Tools > Set Language and select a language from the list.
● Under Mac OS X, the language is changed as for any other application. In System Preferences, select
International and re-launch the application.
Change the language of the Embedded Web Server
The Embedded Web Server can work in the following languages: English, Portuguese, Spanish, Catalan,
French, Italian, German, Polish, Russian, Simplified Chinese, Traditional Chinese, Korean and Japanese. It uses
whichever language you have specified in your Web browser's options. If you have specified a language that
it cannot support, it works in English.
To change the language, you must change your Web browser's language setting. For example, in Internet
Explorer, go to the Tools menu and select Internet Options > Languages. Then ensure that the language you
want is at the top of the list in the dialog box.
Change the sleep mode setting
If the printer is left switched on but unused for a certain period of time, it goes automatically into sleep mode
to save power. To change the time the printer waits before it goes into sleep mode, go to the front panel and
press , then System > Sleep mode wait time. Select the wait time you want and then press OK; you can
set the time from 1 to 240 minutes. The default time is 30 minutes.
Change the auto-off setting
To help save energy, the printer is supplied with an auto-off (automatic power management) feature
enabled, which turns the printer off automatically after a period of inactivity. However, when the printer is
connected to a network, the auto-off feature is automatically disabled, to avoid inconveniencing network
users.
NOTE: The auto-off feature is different from sleep mode: it turns the printer off completely. To turn it back
on, use the Power button as usual.
ENWW Change the language of the HP Utility 47