HP Designjet T3500 Production eMFP - Manual (Page 37)

7. Click Done. You will now see file sharing enabled and Windows sharing on.
The 'scanner user' can now access the folder and write files to it. Next, you must configure the printer to
send scans to the folder.
Paper suitability options
Paper mismatch action
If the paper currently loaded in the printer is not suitable for a particular job, the printer can either put the job
on hold until some suitable paper is loaded, or it can ignore the problem and print the job on the unsuitable
paper. There are several ways in which the loaded paper may be considered unsuitable:
● The paper type is not as specified for the job
● The paper source (roll 1, roll 2 or sheet) is not as specified for the job
● The paper size is smaller than specified for the job
You can set the printer's behavior in such cases from the front panel.
●
Press , then Job management options > Paper mismatch action > Force print if you want such
jobs to print on whatever paper is loaded. This is the default option when printing from a software
application or from the Embedded Web Server; but it does not work when printing from a USB flash
drive.
●
Press , then Job management options > Paper mismatch action > Put job on hold if you want
such jobs to be put on hold. The printer will send an alert whenever a job is put on hold.
When a job is put on hold for paper, it is kept in the printer queue until some suitable paper is loaded, after
which you can visit the queue and choose to resume printing it. Meanwhile, other jobs with different
requirements can continue printing.
ENWW Paper suitability options 27