HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 38)

Command line 38
Item Description
->add fabric MyFabric4 Bay=3 Ports=1,2
Adds a new fabric with two logical ports
->add fabric MyFabric4 Bay=3 Ports=1,2 PrefSpeedType=Custom
PrefSpeed=4000 MaxSpeedType=Custom MaxSpeed=8000
Adds a new fabric with a preferred connection speed of 4Gb and maximum
connection speed of 8Gb
Item Description
remove fabric Remove an existing fabric from the domain.
Syntax
remove fabric <Name|*>
Parameter
Name (required) The name of a specific fabric. Use "*" to remove all existing fabrics.
Examples
->remove fabric VFabric_1
Removes VC FC SAN fabric VFabric_1
->remove fabric *
Removes all VC FC SAN fabrics from the domain
Item Description
set fabric Modify properties of an existing fabric. This command can also be used to force load
balancing of a fabric if login re-distribution is configured.
Syntax
set fabric <Name> [-LoadBalance] [Name=<NewName>]
[Ports=<PortList>] [Speed=<Auto|2Gb|4Gb|8Gb>]
[LinkDist=<Auto|Manual>][PrefSpeedType=<Auto|Custom>]
[PrefSpeed=<100Mb-8Gb in 100Mb
steps>][MaxSpeedType=<UnRestricted|Custom>]
[MaxSpeed=<100Mb-8Gb in 100Mb steps
Parameter
Name (required) A unique name for the fabric
Option
LoadBalance Performs load balancing on a fabric configured for manual login re-distribution. This
option is not supported for DirectAttach fabrics.
Properties
Name (optional) The new name of the fabric
Speed (optional) The port speed for the uplink ports in the fabric. Valid values include "Auto", "2Gb",
"4Gb", and "8Gb". The default port speed is "Auto".
Speed restrictions:
• For the HP Virtual Connect 4Gb FC Module, if the value 8Gb is chosen, VCM
translates the value to "Auto", which allows the module to connect to the SAN
switch at optimal speed.
• For the HP VC 8Gb 24-Port FC Module, HP VC 8Gb 20-Port FC Module, and HP
VC FlexFabric 10Gb/24-port Module, valid speed values include
"Auto","2Gb","4Gb", and "8Gb".
LinkDist
(optional)
Specifies the login re-distribution scheme for load balancing. Valid values include
"Auto" and "Manual". The default login re-distribution is "Manual" for a
"FabricAttach" fabric. Login re-distribution is not supported for "DirectAttach" fabrics.
The HP 4Gb VC-FC Module, HP Virtual Connect 4Gb FC Module, HP VC 8Gb 20-Port
FC Module, and HP VC 8Gb 24-Port FC Module support only manual login
re-distribution. The HP VC FlexFabric 10Gb/24-port Module supports both auto and
manual login re-distribution.