HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 39)

Command line 39
Item Description
Ports (optional) A list of one or more logical FC ports to be added to the fabric. Each port is specified
in the format "<port1>,<port2>,...", where port is the interconnect module port to be
modified in the fabric (affects all modules within a bay group).
For HP VC FlexFabric 10Gb/24-port Modules, port numbers 1, 2, 3, and 4
correspond to ports X1, X2, X3, and X4, respectively.
PrefSpeedType
(optional)
Preferred connection speed for any FCoE connection attached to this fabric. Valid
values are "Auto" and "Custom". "Custom" allows the user to configure the desired
speed. The default value is "Auto". This property can be configured only if the fabric
has uplink ports from FlexFabric interconnect module.
PrefSpeed
(required if
PrefSpeedType is
"Custom")
The preferred connection speed for any FCoE connection attached to this fabric. Valid
values range from: 100Mb-8Gb in 100Mb increments. This property can be
configured only if the fabric has uplink ports from FlexFabric interconnect module.
MaxSpeedType
(optional)
The maximum connection speed for any FCoE connection attached to this fabric. Valid
values are 'Unrestricted' and 'Custom'. 'Custom' allows the user to configure the
desired speed. The default value is 'Unrestricted'. This property can be configured only
if the fabric has uplink ports from FlexFabric interconnect module.
MaxSpeed
(required if
MaxSpeedType is
"Custom")
The maximum connection speed for any FCoE connection attached to this fabric. Valid
values range from: 100Mb-8Gb in 100Mb increments. This property can be
configured only if the fabric has uplink ports from FlexFabric interconnect module.
Examples
->set fabric MyFabric1 Name=MyNewName1
Changes the name of an existing fabric
->set fabric MyFabric2 Speed=2Gb LinkDist=Auto
Modifies the port speed and login re-distribution
->set fabric MyFabric3 Ports=1,2,3,4
Modifies the fabric ports contained in the fabric
->set fabric MyFabric5 -loadBalance
Performs load balancing on a fabric with manual login re-distribution
->set fabric MyFabric4 PrefSpeedType=Custom PrefSpeed=4000
MaxSpeedType=Custom MaxSpeed=8000
Modifies the fabric to preferred connection speed of 4Gb and maximum connection
speed of 8Gb
Item Description
show fabric Display all fabric information.
Syntax
show fabric [<FabricName>|*]
Parameter
Name (optional) Name of an existing fabric. Use “*” to display a detailed output of all fabrics in the VC
domain. If not specified, a summary output of all fabrics appears.
Examples
->show fabric
Displays a summary of all FC SAN fabrics
->show fabric *
Displays detailed information for all FC SAN fabrics
->show fabric SAN_5
Displays detailed information for a specific FC SAN fabric