HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 71)

Command line 71
Item Description
[LacpTimer=<Domain-Default|Short|Long>]
[Labels=<Label1>[<Label2>,…]
[Color=<red|green|blue|orange|purple>]
Parameter
NetworkName
(required)
The unique name of the new network to create. Valid characters include alphanumeric,
"_", and ".". The maximum length of the name is 64 characters.
Options
Quiet Suppresses user confirmation prompts during network creation and modification. This
option is used mainly in automated scripting scenarios.
fcoe Specifies an FCoE network.
Properties
Nags (optional) The names of the existing network access groups of which this network is a member,
separated by commas. Do not use spaces unless they are enclosed in quotation marks.
If no network access groups are specified, the domain default network access group
(Default) is used. This property is not allowed for an FCoE network.
UplinkSet
(optional)
The name of an existing shared uplink set to use with this network. If this property is
specified, a valid VLAN ID must also be provided. The limit is 32 networks per shared
uplink set. This property is required for an FCoE network.
VLanID (optional) The VLAN ID associated with the network (used with the shared uplink set only). The
VLAN ID is a valid number between 1 and 4094. This property is required for an FCoE
network.
State (optional) Enables or disables the network. Valid values are "Enabled" and "Disabled". The
default value is "Enabled".
NativeVLAN
(optional)
Enables or disables the network to act as a native VLAN. Valid values are "Enabled"
and "Disabled". The default value is "Disabled". This property can be specified only if
the network is a shared Ethernet network.
Private
(optional)
Enables or disables the network to act as a private network. Valid values are "Enabled"
and "Disabled". The default value is "Disabled". This property is not allowed for an
FCoE network.
ConnectionMode
(optional)
Specifies the connection type that is formed when multiple ports are added to the
network. Valid values include "Auto" and "Failover". The default value is "Auto".
VLanTunnel
(optional)
Enables or disables VLAN tag tunneling. If enabled, VLAN tags are passed through the
domain without any modification. If disabled, all tagged frames are discarded. This
property is not allowed for an FCoE network.
If multiple networks are configured on any server port, this option cannot be modified.
PrefSpeedType
(optional)
The default connection speed for any Ethernet connection attached to this network.
Valid values include "Auto" and "Custom". "Custom" enables you to configure the
preferred speed. The default value is "Auto".
PrefSpeed
(required if
PrefSpeedType is
"Custom")
The connection speed for any Ethernet connection attached to this network. Valid
values range from 100Mb to 10Gb in 100Mb increments.
MaxSpeedType
(Optional)
The maximum connection speed for any Ethernet connection attached to this network.
Valid values include "Unrestricted" and "Custom". "Custom" enables you to configure
the preferred speed. The default value is "Unrestricted".
MaxSpeed
(required if
MaxSpeedType is
"Custom")
The maximum connection speed for any Ethernet connection attached to this network.
Valid values range from 100Mb to 10Gb in 100Mb increments.
LacpTimer
(optional)
Specifies the network LACP timer. Valid values are "Domain-Default", "Short", and
"Long". This property can be specified only if the network is not a network associated