HP VMA-series Memory Arrays - Manual (Page 141)

AM456-9026A HP VMA SAN Gateway User’s Guide 141
APPENDIX A
VMA SAN Gateway Command Line
Interface Reference
This chapter provides reference information and guidance about how to use the
command line interface (CLI) of the HP VMA SAN Gateway, in the following
sections.
• Using the Command Line Interface on page 142
• CLI Command Descriptions on page 147
• CLI Option Commands on page 149
• General Configuration Commands on page 152
• Network Configuration Commands on page 181
• Media Management Commands on page 185
• Web Interface Configuration Commands on page 189
• Address Resolution Protocol Commands on page 191
• Security Commands on page 192
• SNMP Configuration Commands on page 198
• Scheduling Commands on page 201
• Container and Target Commands on page 203
• Initiator Group Commands on page 204
• Initiator Group Commands on page 204
• LUN Commands on page 204
• Quick Reference to Commands on page 206
Note: For information about using the HP VMA Web Interface as an alternative to
the CLI, see CHAPTER 2, “ Manage, Monitor, and Administer with the HP VMA Web
Interface” on page 23.